Truck has played an important role in the development of freight history in our country, and it is often seen that trucks are running on the road. Listen to some drivers reflect that the vehicle will run off during the driving process, then, how is the truck braking off?Brake pad manufacturers to share with you.
When the truck braking or emergency braking, there will be braking deviation, car braking tail spinning and so on. Slight deviation can still be used, serious deviation can occur accidents.
The causes of truck braking deviation are:
1. The braking force of the four wheel brakes is uneven, and the improper adjustment of one wheel brake or diagonal brake leads to the wheel braking force becoming smaller. When the brake pressure is low, the wheel braking is inconsistent and easy to run off;
2. The car is braking on the slippery road, and the four wheel brakes may not be completely consistent although they have been carefully adjusted. If the four wheels are not consistent, the run is serious, and even turn around;
3. The clearance between brake friction plate and brake drum is uneven everywhere;
4. The material of each friction sheet is different, or a wheel friction sheet is affected by oil or water, and the friction coefficient is reduced;
5. The inner circle of the brake drum is inclined, and the contact with the brake pads is poor;
6. The brake bottom plate is loosely installed and skewed;
7. The reset spring is weak or damaged, and the brake is stuck;
8. The reasons for the car running off, such as inconsistent tire pressure and poor positioning of the front wheel. The leaf spring is broken, the frame is deformed or the car is biased, and other reasons can also aggravate the car brake deviation.
Car brake deviation is also a problem in the car, if there is such a problem, it is recommended that the owners of the vehicle in time to overhaul the vehicle to ensure safety.
The above is the Shandong brake pads for you to sort out some information, I hope to help you, at the same time, we also welcome you to have relevant questions at any time to consult us.
Post time: Feb-08-2025