What are the maintenance methods of the common faults of the car? Let the car brake pad manufacturers tell you.
1, for random or self-connecting car electrical appliances and audio, should first check the lap parts and lap parts of the line, and troubleshoot. Due to the random connection of electrical appliances and audio can easily cause the failure of car computers and other electrical appliances to burn, so we should first eliminate such failures, and then repair and replace other damaged parts, which can avoid repeated rework and repair.
2, for the repaired vehicle, it is necessary to find the original repair part first.
The following circumstances: whether the replacement parts are inferior parts; Whether the disassembly parts are installed incorrectly (left and right, front and back, up and down direction); Whether the mating parts are aligned with the assembly mark; Whether the disposable disassembly parts (important bolts, nuts, shaft pins, gaskets, O-shaped gaskets, etc.) have been replaced according to the manufacturer’s requirements; Whether to replace parts (such as shock absorbing springs) in pairs as required by the manufacturer; Whether to carry out balance test (such as tire) after repair, after excluding the above factors, then analyze and check other parts.
3. For the car that has not been repaired for a long time, the VIE17-digit code of the car should be checked first, the make, model, year, and consultation should be conducted. Don’t check the test car first. Often this kind of car is a “roadside shop” blindly disassembly caused by complex failures, and the replacement parts are mostly shoddy parts, so the owner should be declared to repair conditions (can not repair, when repair, etc.), in order to prevent blame, such lessons are many, it is necessary to prevent problems.
4, high-end cars due to collision and violent vibration after the failure and difficult to start, should first check the safety lock device, do not blindly find other parts of the fault. In fact, as long as the safety lock device is reset, the car can be restarted. Fukang 988, Lexus, Ford and other vehicles have this device.
5, from the car parts check, the car parts are often a high incidence of failure.
In order to meet the needs of the market, air conditioning equipment has been installed in recent years, but the engine has not been improved. After installing air conditioning, the power dissipation increases, resulting in insufficient power of the original engine, poor air conditioning effect, repeated suction of the air conditioning clutch, easy to burn, so through the air conditioning suction sound, you can quickly determine the fault location.
The above is the car brake pad manufacturers for you to organize some information, I hope to help you, at the same time, we also welcome you to have relevant questions at any time to consult us
Post time: Feb-17-2025