News
-
The market maintains a steady growth trend, and the development prospect is considerable
In recent years, with the implementation of relevant supporting policies and measures, the domestic automobile market has shown a steady and good development trend, and the overall size of the automobile brake disc market has maintained a growth trend, and the market siz...Read more -
Watch for the following signs of brake failure
1. Hot cars work After starting the car, it is the habit of most people to warm up a little. But whether it is winter or summer, if the hot car begins to have strength after ten minutes, it may be the problem of loss of pressure in the transmission pipeline of supply pre...Read more -
Brake failure The following methods can be emergency survival
The brake system can be said to be the most critical system of automobile safety, a car with bad brakes is very terrible, this system not only master the safety of the car personnel, and even affect the safety of pedestrians and other vehicles on the road, so the mainten...Read more -
How do new brake pads fit in?
Under normal circumstances, the new brake pads need to be run in 200 kilometers to achieve the best braking effect, therefore, it is generally recommended that the vehicle that has just replaced the new brake pads must be driven carefully. Under normal driving conditions...Read more -
Why can’t the new brake pads stop after they are installed?
Possible reasons are as follows: It is recommended to go to a repair shop for inspection or ask for a test drive after installation. 1, brake installation does not meet the requirements. 2. The surface of the brake disc is contaminated and not cleaned. 3. Brake pipe f...Read more -
Why does brake drag occur?
Possible reasons are as follows: It is recommended to check in the store. 1, brake return spring failure. 2. Improper clearance between brake pads and brake discs or too tight assembly size. 3, the brake pad thermal expansion performance is not qualified. 4, the hand bra...Read more -
What is the effect on braking after wading?
When the wheel is immersed in water, a water film is formed between the brake pad and the brake disc/drum, thereby reducing friction, and the water in the brake drum is not easy to disperse. For disc brakes, this brake failure phenomenon is better. Because the brake pad ...Read more -
Why does jitter occur when braking?
1, this is often caused by brake pads or brake disc deformation. It is related to material, processing accuracy and heat deformation, including: thickness difference of brake disc, roundness of brake drum, uneven wear, heat deformation, heat spots and so on. Treatment: C...Read more -
What causes brake pads to wear too fast?
Brake pads can wear out too quickly for a variety of reasons. Here are some common causes that can cause rapid wear of brake pads: Driving habits: Intense driving habits, such as frequent sudden braking, long-term high-speed driving, etc., will lead to increased brake p...Read more -
How to check brake pads myself?
Method 1: Look at the thickness The thickness of a new brake pad is generally about 1.5cm, and the thickness will gradually become thinner with continuous friction in use. Professional technicians suggest that when the naked eye observation brake pad thickness has only ...Read more -
In high temperature weather, people are easy to “catch fire”, and vehicles are also easy to “catch fire”
In high temperature weather, people are easy to "catch fire", and vehicles are also easy to "catch fire". Recently, I read some news reports, and the news about spontaneous combustion of cars is endless. What causes autoignition? Hot weather, brake pad smoke how to do? T...Read more -
Material Design and Application of Brake Pads
Brake pads are a part of the vehicle brake system, used to increase friction, to achieve the purpose of vehicle braking. Brake pads are usually made of friction materials with wear resistance and high temperature properties. Brake pads are divided into front brake pads a...Read more