In order to properly maintain automotive brake pads and extend their service life, here are some key steps and recommendations:
Avoid emergency braking:
Emergency braking will cause great damage to the brake pads, so in daily driving should try to avoid sudden braking, try to reduce the speed by decelerating braking or point braking.
Reduce braking frequency:
In normal driving, you should develop the habit of reducing braking. For example, when it is necessary to slow down, the braking effect of the engine can be taken advantage of by downshifting, and then the brake can be used to further slow down or stop.
Reasonable control of speed and driving environment:
Try to avoid frequent braking in poor road conditions or traffic congestion to reduce the loss of brake pads.
Regular wheel positioning:
When the vehicle has problems such as running off, the four-wheel positioning should be carried out in time to avoid damage to the vehicle tire and excessive wear of the brake pad on one side.
Clean the brake system regularly:
The brake system is easy to accumulate dust, sand and other debris, which will affect the heat dissipation effect and braking effect of the brake pads. Brake discs and pads should be cleaned regularly with a special cleaner to ensure that they are in good working condition.
Choose the right brake pad material:
According to the actual needs and budget, choose the brake pad material suitable for your vehicle. For example, ceramic brake pads have better high temperature resistance and brake stability, while ceramic brake pads have better wear resistance and brake stability.
Replace brake fluid regularly:
Brake fluid is an important part of brake system, which plays a key role in the lubrication and cooling of brake pads. It is recommended to replace the brake fluid every 2 years or every 40,000 kilometers driven.
Check brake pad thickness regularly:
When the vehicle travels 40,000 kilometers or more than 2 years, brake pad wear may be more serious. The thickness of the brake pads should be carefully checked regularly, and if it has been reduced to the Z small limit value, it should be replaced in time.
New brake pad running-in:
After replacing the new brake pads, due to the flat surface, it is necessary to run in with the brake disc for a period of time (generally about 200 kilometers) to achieve the best braking effect. Heavy driving should be avoided during the run-in period.
Following the above recommendations can effectively extend the service life of the brake pads and improve driving safety.
Post time: Jul-15-2024