How to choose brake pads（pastillas de freno al por mayor） for vehicles driving on the mountain?
This is mainly from the perspective of formula design and analysis. Due to the many slopes and long slopes, vehicles driven in mountainous areas tend to have higher speeds. Small vehicles tend to have higher speeds and brake sharply when turning. Therefore, it is recommended to compare the high friction coefficient of high speed and high temperature brake pads. The specified friction coefficient of the selected brake liner should be greater than 0.42.
Automotive brake pads manufacturers （fábrica de pastillas de freno）teach you how to choose automotive brake pads for vehicles driving on the mountain?
This is mainly from the perspective of formula design analysis. Vehicles driving in mountainous areas have a lot of slope and long slope, so there is more drag brake phenomenon (that is, driving with brakes), which usually leads to more serious friction heat between the brake drum and brake pads, and the temperature is increased, the fit part is higher, so it is recommended to choose products with higher high temperature friction systems. At the same time, it should be considered that there should be no cracks on the surface of the brake liner after friction.
How to choose brake pads for vehicles that often travel in coastal areas?
This is mainly from the perspective of formulation design and advice. For vehicles in coastal areas or wet areas, due to high air humidity, if you choose brake pads with higher metal content, it is easy to rust, so it is recommended to choose low metal or ceramic organic fiber brake pads better.
How to choose brake pads for vehicles that often travel in the Northwest Plateau region?
This is mainly from the perspective of formula design analysis. The air in the Northwest Plateau region is dry, so there is usually no special selection requirement for brake pads. You can choose a cost-effective product based on a comprehensive evaluation.
Why does the handbrake sometimes not work properly in winter
In the northern winter, when the temperature is below freezing, if the handbrake does not work well, it may be due to the existence of ice or water layer between the brake pad and the matching parts, which leads to the coefficient of friction. When this phenomenon occurs, you only need to gently pull the handbrake when the car moves slightly, so that the brake pad can be eliminated by rubbing on the matching part for a few seconds.
Why is the handbrake sometimes not effective in heavy rain?
In the rainy season, if the handbrake does not work properly, it may be due to the existence of a water layer between the brake pad and the matching parts, which reduces the coefficient of friction. When this happens, you only need to gently move the car and gently pull the handbrake. This can be eliminated by rubbing the brake pads and supporting parts together for a few seconds.
Post time: Sep-09-2024