Car brake pad manufacturers take you to see
The working principle of the brake is friction, using the friction between the brake pad and the brake disc and the tire and the ground, the kinetic energy of the vehicle is converted into the heat energy after the friction, and the car is stopped.
The car cannot avoid braking on the road, and the brake pads of the car are generally composed of steel backs, adhesive insulation layers and friction materials. The friction block is composed of friction materials and adhesives, and is squeezed on the brake disc or brake drum when braking to produce friction, so as to achieve the goal of vehicle deceleration and braking. Due to friction, the friction block will gradually be worn, generally speaking, the lower the cost of brake pads wear faster. After the friction material is used, the brake pads should be replaced in time, otherwise the steel back will be in direct contact with the brake disc, resulting in loss of braking effect and damage to the brake disc. The following automotive brake pad manufacturers take you to understand the brake system of the car.
The working principle of the brake is friction, using the friction between the brake pad and the brake disc and the tire and the ground, the kinetic energy of the vehicle is converted into the heat energy after the friction, and the car is stopped. A brake system with good efficiency must be able to provide stable, sufficient and controllable braking force, and have good hydraulic transmission and heat dissipation capacity to ensure that the force applied by the driver from the brake pedal can be fully and effectively transmitted to the main pump and each pump, and avoid hydraulic failure and brake decline caused by high heat. The brake system on the car is divided into two categories: disc and drum, but in addition to the cost advantage, the efficiency of drum brakes is far less than disc brakes.
Post time: Nov-12-2024