（Pastillas de freno del coche con estos pocos síntomas, nunca salga de la carretera）
Brake pads（pastillas de freno coche）are not a child’s game. If these symptoms appear on the brakes, stay off the road!
When braking, various things can happen. Many drivers are not aware of the situation and still dare to drive on the road. In fact, these issues should be taken seriously. Let’s talk today. Take a look at your car to see if you have any of these problems.
1. When braking, the steering wheel is tilted
Steer to one side when braking. This is the imbalance of the left and right auxiliary cylinders of the brake system on the brake disc. However, it is hard to find this problem. Because the brake disc spins faster.
2. Brake sink
If the brake is continuously pressed during driving, the pedal position becomes higher. The brakes are sinking, usually leaking oil!
3. Brake wobble
The flatness of the brake disc of the automobile brake pad decreases, and the direct response is brake tremor. At this point, you can use the method of polishing the brake disc or directly replacing the brake disc. Usually, this happens on vehicles that take a long time!
4. Weak brakes
The reason for the weak braking function is most likely a pressure loss in the transmission line that provides the pressure. In this case, for more information on car repair, please keep an eye on the “Automatic repair Dream Factory”, which is difficult for us to solve. He took the car to the garage for an overhaul. Otherwise, the consequences will be severe.
5. The brakes harden
First, the brakes need to harden. The hardening of the brake may be caused by the failure of the vacuum booster. This is because the brake has been in use for a long time. Many parts must be inspected and replaced in time.
Brake softening is a bigger problem. The reaction is that the oil pressure of the secondary cylinder and the master cylinder is insufficient, and there may be oil leakage! This can also be a failure of the brake disc or brake liner. For more automotive repair information, please follow the automotive brake pad manufacturer. There may be air leaking into the brake tube. The monitoring method is to step on the brake several times in succession. If the brakes are elevated and elastic, this is the intake!
Post time: Sep-04-2024