（Los fabricantes de pastillas de freno del automóvil le enseñan a resolver el problema durante el frenado）
1. Why can’t the new car brake pads（pastillas de freno coche） be stopped after installation?
After the replacement of the new brake pads, the car can not stop the reasons are: the brake device does not meet the requirements; The surface of the brake pads has been contaminated and not cleaned; Brake line failure or insufficient brake fluid; The exhaust in the hydraulic cylinder is incomplete; Due to excessive wear or uneven surface of brake pads, brake pads and brake discs cannot be effectively installed; The brake disc or brake liner is not qualified.
2. Why does braking resistance occur?
The causes of brake resistance include: brake spring reset failure; The installation clearance between the brake liner and the brake disc is inappropriate or the assembly size is too tight; When installing brake pads, accessories are improperly installed or brake pads are seriously deformed; The thermal expansion parameters of the brake disc are not qualified; Handbrake is not good waiting.
3. What causes smoke when braking?
The reasons for the smoke during braking are as follows: The brake disc manufacturing process contains organic materials, such as resin and rubber powder, which will decompose when the temperature is too high. The phenomenon is the formation of smoke and oily substances on the surface of the brake liner, which affects the braking effect.
4. What should I do if the brake suddenly becomes soft during normal use?
Soft brakes are common. Many car owners have reported this phenomenon in their cars. The cause of this phenomenon may be: insufficient brake fluid. There is air in the brake line; Brake fluid deterioration; Brake discs and pads（pastillas de freno para coche）. Relatively thin and so on. The most common is brake fluid deterioration and brake fluid insufficiency.
5. What causes the brake pedal to bounce back when I step on the brake?
When the brake is pressed, the pedal will bounce and push the foot. Some vehicles encounter this on a regular basis. The reasons for this phenomenon are: the ABS of the car works normally, the surface of the brake disc and brake liner is uneven, and the steel ring is deformed (drum brake shoes).
6. What was the cause of the “failure”?
There are more and more incidents of brake failure in cars. According to reports, after professional investigation, brake failure accidents mainly occur in small displacement cars. Because the power of the engine of a small displacement car is inherently insufficient, especially in summer, and the weather is hot, the air conditioning on the car is turned on, and the power provided by the engine acts on the brakes when the owner repeatedly presses the brakes (for example, in a reverse garage). On the booster pump, there will be a certain loss of efficiency, which will lead to the failure of the brake booster pump and the phenomenon of “brake instability”.
7. Why does the pedal return to the top when I step on the brake?
Many car owners also experience this situation, especially when braking quickly, they always feel that the brake pedal has returned to the top. Faced with this situation, many car owners do not know what to do. In fact, there are two kinds of situations: one is the system. Movable lining partially worn. When the car brakes, the car’s ABS system is activated, and the brake pedal will bounce back. Another type of brake disc and brake liner has an uneven surface, which can also occur when the steel ring is deformed. In both cases, car brake pad manufacturers（proveedores de pastillas de freno） recommend that you should check in time.
8. What is the phenomenon of softness during braking?
Many owners report, why does my car feel a little soft on the brakes? In short, you can brake your foot first and then bottom out after your foot softens, which gives the impression that the car can’t stop. This is mainly because the brake fluid has not been changed for a long time, there is air in the brake system, and there is a lack of brake fluid. When such problems occur, automotive brake pad manufacturers should check these items in time. If these are normal, you need to check whether the friction coefficient of the brake pads is correctly selected.
9. What makes you feel bad when you brake?
Compared with the softening of the brake, the hardening of the brake is also a common phenomenon. This is because the brake booster system is mostly vacuum assisted. When the engine is not running, the vacuum pump of the brake system does not generate power. Without help, the stampede is naturally heavy. If the car brakes particularly hard while the engine is running, the vacuum booster is likely to have problems (frequent braking can also cause this phenomenon).
Post time: Sep-18-2024