Brake pads are a very important part of the car, which is directly related to driving safety. When the brake pads are affected by dirt such as dust and mud, it will cause the braking effect to decline, and even cause brake failure in serious cases. In order to ensure the safety of the vehicle, it is necessary to clean the brake pads regularly. Below I will introduce the brake pad cleaning method, I hope to help the majority of owners.
1. Prepare tools: the tools needed to clean brake pads mainly include brake pad cleaner, paper towels, car wash water, etc.
2. Preparation steps: First, stop the vehicle on the flat ground and tighten the handbrake. Then turn on the vehicle engine and keep the vehicle stationary by putting it in N gear or putting it in park gear. Then put the front wheels in place to ensure that the vehicle will not slide during operation.
3. Cleaning steps: First of all, rinse the brake pads with clean water and wash the large particles of dirt on the surface. Then, spray the brake pad cleaner on the brake pad, after a few minutes, gently wipe the surface of the brake pad with a paper towel or brush, and wipe the dirt. Be careful not to wipe hard, so as not to damage the brake pads.
4. Treatment follow-up: After cleaning, you can wash the surface of the brake pad with car wash water to remove the residual detergent. Then wait for the brake pads to dry naturally.
5. Regular maintenance: In order to ensure the normal use of brake pads, it is recommended to clean and check the brake pads at regular intervals. If the brake pads are found to be seriously worn or have other problems, it is necessary to replace or repair them in time.
Through the above steps, we can easily clean the brake pads, ensure that the brake system is stable and effective, and avoid traffic accidents caused by brake failure. It is hoped that the majority of owners can pay attention to the maintenance of brake pads to ensure the driving safety of themselves and others.
Post time: Aug-05-2024