Since the carbonization of brake pads（pastillas de freno coche） will lead to a variety of safety hazards, serious will endanger driving safety. So what causes it? The following brake pad manufacturers（fábrica de pastillas de freno pastillas de freno al por mayor） will give you a detailed introduction, I hope to help you!
1, the cause: the newly replaced brake pads are thicker, or the wrong brake pad model is installed.
Solution: Install the correct type of brake pads. And after replacing the brake pads, turn the brake disc by hand to check whether there is a stuck phenomenon before the test.
2, the cause: brake pad high temperature resistance is not qualified. According to the national standard, the suitable working temperature of the brake pads is 100 ~ 350℃. However, there are still inferior brake pads on the market that carbonize at 250℃, and the friction coefficient decreases rapidly.
Solution: Install qualified brake pad products.
3, the cause: the brake pad pump return is not normal, the brake pad is stuck in the caliper slot or the caliper guide pin is stuck, causing the drag brake.
Solution: Check the brake system and maintain it regularly.
4, cause: continuous downhill during driving, long time braking.
Solution: continuous downhill, to reduce gear, open the auxiliary brake control speed, brake do not continuously step on, to step on the immediate effect; The main reason for brake failure is because the brake is used too often, and the brake pads are too hot to brake. Therefore, when driving downhill in the mountains, do not continuously step on the brake, try to use the brake to prevent the brake from overheating, resulting in brake failure.
5. Cause: Forget to put down the handbrake.
Solution: Carefully check the vehicle before driving, put down the handbrake. Many cars now have automatic parking functions to avoid such problems
Post time: Sep-26-2024