（Fabricantes de pastillas de freno de automóviles: ¿Cómo tratar correctamente los defectos de desgaste de las pastillas de freno para evitar situaciones peligrosas）
Brake pads are the key components in the automobile brake system, responsible for realizing the vehicle brake function. With the growth of the use of time, brake pads will appear wear defects, if not handled in time, may lead to brake failure, resulting in dangerous situations. Therefore, it is very important to treat the wear defects of brake pads correctly. This article will introduce in detail how to correctly treat the wear defects of brake pads from the following aspects to prevent dangerous situations.
First of all, timely observation of brake pad wear is the key to preventing dangerous situations. The driver can observe the wear and tear of the brake pads through vision and hearing. Visually, you can use a flashlight to shine on the brake pad behind the tire to check the thickness and surface wear of the brake pad. Generally speaking, the brake pad thickness is less than 2 mm and needs to be replaced. At the same time, attention should also be paid to whether there are cracks or obvious signs of damage on the brake pads. Auditory, when the vehicle brakes, if you can hear the sharp friction between the brake pad and the brake disc or the remaining thickness of the brake pad is insufficient, you need to replace the brake pad in time.
Secondly, maintaining good driving habits can also effectively prevent dangerous situations caused by brake pad wear defects. Good driving habits include proper use of the brakes, avoiding sharp braking and prolonged continuous braking. Sudden braking will produce greater braking force and temperature, accelerating the wear of the brake pads. Continuous braking for a long time will also cause the brake pads to overheat and wear. Therefore, the driver should predict the road conditions in advance, use the brakes rationally, avoid sudden braking and long-term continuous braking, and reduce the wear and tear of the brake pads.
In addition, regular maintenance of the brake system is also an important measure to prevent brake pad wear defects resulting in dangerous situations. The driver should check and replace the brake pads regularly in accordance with the requirements of the car manual. Under normal circumstances, the replacement cycle of brake pads is 20-30,000 kilometers, but the specific replacement cycle should also be determined according to the driving road conditions and personal driving habits. In addition, the driver should also regularly check the boiling and freezing point of the brake fluid to ensure that its performance is normal. If the boiling point and freezing point of the brake fluid are low, the brake fluid should be replaced in time to ensure the normal operation of the brake system.
In addition, the driver should pay attention to the maintenance of brake pads during daily use. Frequent car washing can keep the brake pads clean and avoid wear caused by impurities. In addition, the rational use of brakes can also extend the service life of brake pads. When driving in urban areas, the driver can use engine braking and shift braking to reduce the reliance on brakes and reduce the wear of brake pads.
Then, when the brake pads are found to have wear defects, the driver should replace the brake pads in time. The wear of the brake pads will not only affect the brake performance, but also may lead to the vehicle braking failure or braking imbalance, increasing the distance and time of emergency braking, therefore, once the brake pads are found to have wear defects, the driver should immediately contact a professional car repair point for replacement maintenance.
To sum up, the correct treatment of brake pad wear defects is an important measure to prevent dangerous situations. The driver should observe the wear of the brake pads in time, maintain good driving habits, regularly maintain the brake system, pay attention to the maintenance of the brake pads, and replace the brake pads in time when the wear defects are found. Only by doing the above points can we ensure the normal operation of the brake pads and ensure driving safety.
Post time: Oct-30-2024