D487

Short Description:


  • Position: Front wheel
  • Braking system: TRW
  • Width: 94.7mm
  • Height: 51.9mm
  • Thickness: 17.9mm
  • Product Detail

    APPLICABLE CAR MODELS

    REFERENCE MODELNUMBER

    Check brake pads myself?

    Method 1: Look at the thickness

    The thickness of a new brake pad is generally about 1.5cm, and the thickness will gradually become thinner with continuous friction in use. Professional technicians suggest that when the naked eye observation brake pad thickness has only left the original 1/3 thickness (about 0.5cm), the owner should increase the frequency of self-test, ready to replace. Of course, individual models due to wheel design reasons, do not have the conditions to see the naked eye, need to remove the tire to complete.

    Method 2: Listen to the sound

    If the brake is accompanied by the sound of "iron rubbing iron" at the same time (it may also be the role of the brake pad at the beginning of the installation), the brake pad must be replaced immediately. Because the limit mark on both sides of the brake pad has directly rubbed the brake disc, it proves that the brake pad has exceeded the limit. In this case, in the replacement of brake pads at the same time with the brake disc inspection, this sound often occurs when the brake disc has been damaged, even if the replacement of new brake pads still can not eliminate the sound, serious need to replace the brake disc.

    Method 3: Feel Strength

    If the brake feels very difficult, it may be that the brake pad has basically lost friction, and it must be replaced at this time, otherwise it will cause a serious accident.

    What causes brake pads to wear too fast?

    Brake pads can wear out too quickly for a variety of reasons. Here are some common causes that can cause rapid wear of brake pads:

    Driving habits: Intense driving habits, such as frequent sudden braking, long-term high-speed driving, etc., will lead to increased brake pad wear. Unreasonable driving habits will increase the friction between the brake pad and the brake disc, accelerating wear

    Road conditions: driving in poor road conditions, such as mountainous areas, sandy roads, etc., will increase the wear of brake pads. This is because brake pads need to be used more frequently in these conditions to keep the vehicle safe.

    Brake system failure: The failure of the brake system, such as the uneven brake disc, brake caliper failure, brake fluid leakage, etc., may lead to abnormal contact between the brake pad and the brake disc, accelerating the wear of the brake pad.

    Low quality brake pads: The use of low quality brake pads may lead to the material is not wear-resistant or the braking effect is not good, thus accelerating wear.

    Improper installation of brake pads: incorrect installation of brake pads, such as incorrect application of anti-noise glue on the back of brake pads, incorrect installation of anti-noise pads of brake pads, etc., may lead to abnormal contact between brake pads and brake discs, accelerating wear.

    If the problem of brake pads wearing too fast still exists, drive to the repair shop for maintenance to determine if there are other problems and take appropriate measures to solve them.

    Why does jitter occur when braking?

    1, this is often caused by brake pads or brake disc deformation. It is related to material, processing accuracy and heat deformation, including: thickness difference of brake disc, roundness of brake drum, uneven wear, heat deformation, heat spots and so on.

    Treatment: Check and replace the brake disc.

    2. The vibration frequency generated by the brake pads during braking resonates with the suspension system. Treatment: Do brake system maintenance.

    3. The friction coefficient of brake pads is unstable and high.

    Treatment: Stop, self-check whether the brake pad is working normally, whether there is water on the brake disc, etc., the insurance method is to find a repair shop to check, because it may also be the brake caliper is not properly positioned or the brake oil pressure is too low.

    How do new brake pads fit in?

    Under normal circumstances, the new brake pads need to be run in 200 kilometers to achieve the best braking effect, therefore, it is generally recommended that the vehicle that has just replaced the new brake pads must be driven carefully. Under normal driving conditions, the brake pads should be checked every 5000 kilometers, the content not only includes the thickness, but also check the wear state of the brake pads, such as whether the degree of wear on both sides is the same, whether the return is free, etc., and the abnormal situation must be dealt with immediately. About how the new brake pads fit in.


  • Previous:
  • Next:

  • MERCEDES-BENZ 190 (W201) 1982/10-1993/08 190 Saloon (W201) E 2.0 (201.024)
    36660 D487 986590550 000 420 89 20 284.83 14209620
    AC450181D D487-7367 2105500 000 420 91 00 2284 24200220
    602923 BL1219A4 7367D487 000 420 91 20 2284.83 A0004209100
    13.0460-2923.2 BL1219B4 D4877367 000 429 91 20 450181 A0024200220
    571353B 2671 180745700 001 420 81 20 SP 124 T0352ECO
    571353B-AS 180745 5713531AS 001 420 96 20 10 91 6061 7114
    571353X 180745-700 571559JAS 002 42002 20 2105503 7114S
    571868B 571353D 6337 A 000 420 91 00 2105505 28400
    DB1256 5713531 025 210 5517 A 002 420 02 20 21055 179 1 4 28483
    0 986 490 550 5713531-AS 180 9585 21055 179 1 4 T298 228400
    0 986 494 058 5715591-AS MDB1402 T0352 21055 179 1 4 T4100 228483
    0 986 590 550 05P302 CD8493 T0352-ECO 8110 23936 SP124
    21055 00 363702160257 FD6375 7.114 4208920 10916061
    LP597 13046029232 FD6375A 7.1145 4209100 2105517914
    16061 571353BAS FD6375E BP339 4209120 2105517914T298
    FDB669 986490550 252105517 BP571 4299120 2105517914T4100
    FSL669 986494058 229937 284 14208120 811023936
    7367-D487 GDB817 551011 21054 21128 V308103
    21129 V30-8103 598241 21055
    Write your message here and send it to us