D163

Short Description:


  • Position: Front wheel
  • Braking system: ATE
  • Width: 89.9mm
  • Height: 70.5mm
  • Thickness: 19mm
  • Product Detail

    APPLICABLE CAR MODELS

    REFERENCE MODELNUMBER

    Check brake pads myself?

    Method 1: Look at the thickness

    The thickness of a new brake pad is generally about 1.5cm, and the thickness will gradually become thinner with continuous friction in use. Professional technicians suggest that when the naked eye observation brake pad thickness has only left the original 1/3 thickness (about 0.5cm), the owner should increase the frequency of self-test, ready to replace. Of course, individual models due to wheel design reasons, do not have the conditions to see the naked eye, need to remove the tire to complete.

    Method 2: Listen to the sound

    If the brake is accompanied by the sound of "iron rubbing iron" at the same time (it may also be the role of the brake pad at the beginning of the installation), the brake pad must be replaced immediately. Because the limit mark on both sides of the brake pad has directly rubbed the brake disc, it proves that the brake pad has exceeded the limit. In this case, in the replacement of brake pads at the same time with the brake disc inspection, this sound often occurs when the brake disc has been damaged, even if the replacement of new brake pads still can not eliminate the sound, serious need to replace the brake disc.

    Method 3: Feel Strength

    If the brake feels very difficult, it may be that the brake pad has basically lost friction, and it must be replaced at this time, otherwise it will cause a serious accident.

    What causes brake pads to wear too fast?

    Brake pads can wear out too quickly for a variety of reasons. Here are some common causes that can cause rapid wear of brake pads:

    Driving habits: Intense driving habits, such as frequent sudden braking, long-term high-speed driving, etc., will lead to increased brake pad wear. Unreasonable driving habits will increase the friction between the brake pad and the brake disc, accelerating wear

    Road conditions: driving in poor road conditions, such as mountainous areas, sandy roads, etc., will increase the wear of brake pads. This is because brake pads need to be used more frequently in these conditions to keep the vehicle safe.

    Brake system failure: The failure of the brake system, such as the uneven brake disc, brake caliper failure, brake fluid leakage, etc., may lead to abnormal contact between the brake pad and the brake disc, accelerating the wear of the brake pad.

    Low quality brake pads: The use of low quality brake pads may lead to the material is not wear-resistant or the braking effect is not good, thus accelerating wear.

    Improper installation of brake pads: incorrect installation of brake pads, such as incorrect application of anti-noise glue on the back of brake pads, incorrect installation of anti-noise pads of brake pads, etc., may lead to abnormal contact between brake pads and brake discs, accelerating wear.

    If the problem of brake pads wearing too fast still exists, drive to the repair shop for maintenance to determine if there are other problems and take appropriate measures to solve them.

    Why does jitter occur when braking?

    1, this is often caused by brake pads or brake disc deformation. It is related to material, processing accuracy and heat deformation, including: thickness difference of brake disc, roundness of brake drum, uneven wear, heat deformation, heat spots and so on.

    Treatment: Check and replace the brake disc.

    2. The vibration frequency generated by the brake pads during braking resonates with the suspension system. Treatment: Do brake system maintenance.

    3. The friction coefficient of brake pads is unstable and high.

    Treatment: Stop, self-check whether the brake pad is working normally, whether there is water on the brake disc, etc., the insurance method is to find a repair shop to check, because it may also be the brake caliper is not properly positioned or the brake oil pressure is too low.

    How do new brake pads fit in?

    Under normal circumstances, the new brake pads need to be run in 200 kilometers to achieve the best braking effect, therefore, it is generally recommended that the vehicle that has just replaced the new brake pads must be driven carefully. Under normal driving conditions, the brake pads should be checked every 5000 kilometers, the content not only includes the thickness, but also check the wear state of the brake pads, such as whether the degree of wear on both sides is the same, whether the return is free, etc., and the abnormal situation must be dealt with immediately. About how the new brake pads fit in.


  • Previous:
  • Next:

  • BMW 2500 Series Saloon (E3) 1968/10-1977/04 2500 Series Saloon (E3) 3.3 L 5 Series Saloon (E12) 525 BMW 6 Series Coupe (E24) 1975/10-1989/04 7 Series Saloon (E23) 728 7 Series Saloon (E23) 735 i
    2500 Series Saloon (E3) 2.8 L BMW 5 Series Saloon (E12) 1972/03-1981/08 5 Series Saloon (E12) 525 6 Series Coupe (E24) 628 CSi 7 Series Saloon (E23) 728 i 7 Series Saloon (E23) 745 i
    2500 Series Saloon (E3) 3.0 L 5 Series Saloon (E12) 518 5 Series Saloon (E12) 528 6 Series Coupe (E24) 630 CS 7 Series Saloon (E23) 730 7 Series Saloon (E23) 745 i
    2500 Series Saloon (E3) 3.0 S 5 Series Saloon (E12) 520 5 Series Saloon (E12) 528 i 6 Series Coupe (E24) 633 CSi 7 Series Saloon (E23) 733 i BMW M1 Coupe (E26) 1979/05-1983/05
    2500 Series Saloon (E3) 3.0 Si 5 Series Saloon (E12) 520 i 5 Series Saloon (E12) 528 i 6 Series Coupe (E24) 633 CSi 7 Series Saloon (E23) 735 i M1 Coupe (E26) 3.5
    2500 Series Saloon (E3) 3.2 Li 5 Series Saloon (E12) 520/6 5 Series Saloon (E12) M535 i BMW 7 Series Saloon (E23) 1977/05-1988/04 7 Series Saloon (E23) 735 i
    36386 180304 13046090342 983 805 675 1 BP313 34111103207
    AC472286D 571260J 986424050 34 11 1 103 207 11.3 34111103321
    609034 05P207 120221 34 11 1 103 321 2011.3 34111103726
    13.0460-9030.2 025 204 3715 7015D163 34 11 1 103 726 472286 34111103744
    13.0460-9034.2 138 D1637015 34 11 1 103 744 32140 34111111649
    571260B MDB1024 252043715 34 11 1 111 649 2043703 34111117379
    0 986 424 050 MDB1115 108073 34 11 1 117 379 2043715004 34111117979
    LP428 CD8015 134848 34 11 1 117 979 20437 150 0 4 T476 34111159257
    12-0221 FD4034A 11179369 34 11 1 159 257 GDB270 34111160263
    FDB161 108 073 34111379 34 11 1 160 263 P1113.30 34211160175
    7015-D163 111665 0060736109 34 21 1 160 175 20092 11913220390100
    D163 134 848 0060 736 182 11 913 220 390 100 20437 1130
    D163-7015 1 117 936 9 0060 737 389 T4161 0060736182 201130
    BL1076A2 00 03 4 111 379 60737389 T4162 0060778272 2043715004T476
    6102702 0060 736 109 0060 778 272 BLF313 9838056751 P111330
    180083 13046090302
    Write your message here and send it to us