D1253 Semi-metal brake pads China factory direct

Short Description:


  • Position: Front wheel
  • Braking system: BOS
  • Width: 134.4mm
  • Height: 64.5mm
  • Thickness: 20.9mm
  • Product Detail

    APPLICABLE CAR MODELS

    REFERENCE MODELNUMBER

    Check brake pads myself?

    Method 1: Look at the thickness

    The thickness of a new brake pad is generally about 1.5cm, and the thickness will gradually become thinner with continuous friction in use. Professional technicians suggest that when the naked eye observation brake pad thickness has only left the original 1/3 thickness (about 0.5cm), the owner should increase the frequency of self-test, ready to replace. Of course, individual models due to wheel design reasons, do not have the conditions to see the naked eye, need to remove the tire to complete.

    Method 2: Listen to the sound

    If the brake is accompanied by the sound of "iron rubbing iron" at the same time (it may also be the role of the brake pad at the beginning of the installation), the brake pad must be replaced immediately. Because the limit mark on both sides of the brake pad has directly rubbed the brake disc, it proves that the brake pad has exceeded the limit. In this case, in the replacement of brake pads at the same time with the brake disc inspection, this sound often occurs when the brake disc has been damaged, even if the replacement of new brake pads still can not eliminate the sound, serious need to replace the brake disc.

    Method 3: Feel Strength

    If the brake feels very difficult, it may be that the brake pad has basically lost friction, and it must be replaced at this time, otherwise it will cause a serious accident.

    What causes brake pads to wear too fast?

    Brake pads can wear out too quickly for a variety of reasons. Here are some common causes that can cause rapid wear of brake pads:

    Driving habits: Intense driving habits, such as frequent sudden braking, long-term high-speed driving, etc., will lead to increased brake pad wear. Unreasonable driving habits will increase the friction between the brake pad and the brake disc, accelerating wear

    Road conditions: driving in poor road conditions, such as mountainous areas, sandy roads, etc., will increase the wear of brake pads. This is because brake pads need to be used more frequently in these conditions to keep the vehicle safe.

    Brake system failure: The failure of the brake system, such as the uneven brake disc, brake caliper failure, brake fluid leakage, etc., may lead to abnormal contact between the brake pad and the brake disc, accelerating the wear of the brake pad.

    Low quality brake pads: The use of low quality brake pads may lead to the material is not wear-resistant or the braking effect is not good, thus accelerating wear.

    Improper installation of brake pads: incorrect installation of brake pads, such as incorrect application of anti-noise glue on the back of brake pads, incorrect installation of anti-noise pads of brake pads, etc., may lead to abnormal contact between brake pads and brake discs, accelerating wear.

    If the problem of brake pads wearing too fast still exists, drive to the repair shop for maintenance to determine if there are other problems and take appropriate measures to solve them.

    Why does jitter occur when braking?

    1, this is often caused by brake pads or brake disc deformation. It is related to material, processing accuracy and heat deformation, including: thickness difference of brake disc, roundness of brake drum, uneven wear, heat deformation, heat spots and so on.

    Treatment: Check and replace the brake disc.

    2. The vibration frequency generated by the brake pads during braking resonates with the suspension system. Treatment: Do brake system maintenance.

    3. The friction coefficient of brake pads is unstable and high.

    Treatment: Stop, self-check whether the brake pad is working normally, whether there is water on the brake disc, etc., the insurance method is to find a repair shop to check, because it may also be the brake caliper is not properly positioned or the brake oil pressure is too low.

    How do new brake pads fit in?

    Under normal circumstances, the new brake pads need to be run in 200 kilometers to achieve the best braking effect, therefore, it is generally recommended that the vehicle that has just replaced the new brake pads must be driven carefully. Under normal driving conditions, the brake pads should be checked every 5000 kilometers, the content not only includes the thickness, but also check the wear state of the brake pads, such as whether the degree of wear on both sides is the same, whether the return is free, etc., and the abnormal situation must be dealt with immediately. About how the new brake pads fit in.


  • Previous:
  • Next:

  • Mercedes V-CLASS MPV (638/2) 1996/02-2003/07 V-CLASS MPV (638/2) V 230 (638.234, 638.294) Vito Box (638) 108 CDI 2.2 (638.094) Vito Box (638) 112 CDI 2.2 (638.094) Vito Bus(638) 108 CDI 2.2 (638.194) Vito Bus(638) 112 CDI 2.2 (638.194)
    V-CLASS MPV (638/2) V 200 (638.214, 638.294) V-CLASS MPV (638/2) V 230 TD (638.274) Vito Box(638) 108 D 2.3 (638.064, 638.068) Vito Box(638) 113 2.0 (638.014, 638.094) VITO Bus(638) 108 D 2.3 (638.164) Vito Bus(638) 113 2.0 (638.114, 638.194)
    V-CLASS MPV (638/2) V 200 CDI (638.294) V-CLASS MPV (638/2) V 280 (638.244, 638.294) Vito Box (638) 110 CDI 2.2 (638.094) Vito Box(638) 114 2.3 (638.034, 638.094) Vito Bus(638) 110 CDI 2.2 (638.194) Vito Bus(638) 114 2.3 (638.134, 638.194)
    V-CLASS MPV (638/2) V 220 CDI (638.294) Mercedes-Benz Vito Box(638) 1997/03-2003/07 Vito Box(638) 110 D 2.3 (638.074, 638.078) Mercedes Vito Bus (638) 1996/02-2003/07 Vito Bus(638) 110 TD 2.3 (638.174)
    37095 FVR1304 D12538371 223340 1501223340 2302270
    37095 OE 8371-D1253 FBP1130 000 421 41 10 753 8110 23020
    AC678681D D1253 887095 000 423 61 10 32729 589.0
    603980 D1253-8371 571946J 003 420 01 20 571946S GDB1373
    13.0460-3980.2 FBP-1130 1Q1012608 003 420 54 20 10 91 6094 V30-8155
    BA2091 BL1680A2 05P672 000 421 41 10 10 0004214110 V30-8155-1
    571946B 20582 363702161094 230 222 09 04 0004236110 540937
    DB1986 6113734 6522 638 421 00 10 0034200120 598299
    0 986 424 476 88 7095 22-0573-0 A 000 421 41 10 0034205420 WBP23022A
    0 986 494 013 7180 701 A 003 420 01 20 000421411010 23022
    PA1181 141288 025 230 2220 10324 2302220904 23022.205.1
    23022 00 703 20 370950E 518 T1168 6384210010 23022.205.2
    P 50 031 13046039802 MDB1967 7.509 A0004214110 2302220904T3078
    822-573-0 986424476 CD8486 BP1096 A0034200120 811023020
    LP1425 986494013 FD6782A T0600094 7509 5890
    B110474 230220070320 FD6782N T0610107 270100 V308155
    12-0821 P50031 2205730 T0610834 10916094 V3081551
    16094 8225730 70100 2701 2302201 230222051
    FDB1304 120821 252302220 678681 23022 20904 230222052
    FSL1304 8371D1253 FD6782V D3336 23022 209 0 4 T3078
    Write your message here and send it to us