D1125

Short Description:


  • Position: Front wheel
  • Braking system: Mando
  • Width: 131.3mm
  • Height: 59.9mm
  • Thickness: 17.5mm
  • Product Detail

    REFERENCE MODELNUMBER

    APPLICABLE CAR MODELS

    Check brake pads myself?

    Method 1: Look at the thickness

    The thickness of a new brake pad is generally about 1.5cm, and the thickness will gradually become thinner with continuous friction in use. Professional technicians suggest that when the naked eye observation brake pad thickness has only left the original 1/3 thickness (about 0.5cm), the owner should increase the frequency of self-test, ready to replace. Of course, individual models due to wheel design reasons, do not have the conditions to see the naked eye, need to remove the tire to complete.

    Method 2: Listen to the sound

    If the brake is accompanied by the sound of "iron rubbing iron" at the same time (it may also be the role of the brake pad at the beginning of the installation), the brake pad must be replaced immediately. Because the limit mark on both sides of the brake pad has directly rubbed the brake disc, it proves that the brake pad has exceeded the limit. In this case, in the replacement of brake pads at the same time with the brake disc inspection, this sound often occurs when the brake disc has been damaged, even if the replacement of new brake pads still can not eliminate the sound, serious need to replace the brake disc.

    Method 3: Feel Strength

    If the brake feels very difficult, it may be that the brake pad has basically lost friction, and it must be replaced at this time, otherwise it will cause a serious accident.

    What causes brake pads to wear too fast?

    Brake pads can wear out too quickly for a variety of reasons. Here are some common causes that can cause rapid wear of brake pads:

    Driving habits: Intense driving habits, such as frequent sudden braking, long-term high-speed driving, etc., will lead to increased brake pad wear. Unreasonable driving habits will increase the friction between the brake pad and the brake disc, accelerating wear

    Road conditions: driving in poor road conditions, such as mountainous areas, sandy roads, etc., will increase the wear of brake pads. This is because brake pads need to be used more frequently in these conditions to keep the vehicle safe.

    Brake system failure: The failure of the brake system, such as the uneven brake disc, brake caliper failure, brake fluid leakage, etc., may lead to abnormal contact between the brake pad and the brake disc, accelerating the wear of the brake pad.

    Low quality brake pads: The use of low quality brake pads may lead to the material is not wear-resistant or the braking effect is not good, thus accelerating wear.

    Improper installation of brake pads: incorrect installation of brake pads, such as incorrect application of anti-noise glue on the back of brake pads, incorrect installation of anti-noise pads of brake pads, etc., may lead to abnormal contact between brake pads and brake discs, accelerating wear.

    If the problem of brake pads wearing too fast still exists, drive to the repair shop for maintenance to determine if there are other problems and take appropriate measures to solve them.

    Why does jitter occur when braking?

    1, this is often caused by brake pads or brake disc deformation. It is related to material, processing accuracy and heat deformation, including: thickness difference of brake disc, roundness of brake drum, uneven wear, heat deformation, heat spots and so on.

    Treatment: Check and replace the brake disc.

    2. The vibration frequency generated by the brake pads during braking resonates with the suspension system. Treatment: Do brake system maintenance.

    3. The friction coefficient of brake pads is unstable and high.

    Treatment: Stop, self-check whether the brake pad is working normally, whether there is water on the brake disc, etc., the insurance method is to find a repair shop to check, because it may also be the brake caliper is not properly positioned or the brake oil pressure is too low.


  • Previous:
  • Next:

  • PAD1562 D1125 986494374 58101-3KA20 SP1182 581013KA20
    13.0460-5639.2 D1125-8233 P30038 58101-3KA30 2437501 581013KA30
    572616B D1125-8306 8233D1125 58101-3KA32 GDB3409 581013KA32
    DB1924 6134099 8306D1125 58101-3LA10 P13043.02 581013LA10
    0 986 494 374 181745 D11258233 58101-3LA11 24375 581013LA11
    PA1824 05P1598 D11258306 58101-3LA20 24376 581013LA20
    P 30 038 MDB2753 MP3678 T1611 24385 120402
    FDB4246 MP-3678 58101-2EA30 1204.02 581012EA30 120412
    FSL4246 D11183M 58101-3FA01 1204.12 581013FA01 2120402
    8233-D1125 FD7442A 58101-3FA11 21204.02 581013FA11 P1304302
    8306-D1125 13046056392
    Hyundai Yazun (TG) 2003/06- Hyundai ix20 (JC) 2010/11- Sonata sedan (NF) 2.0 CRDi Sonata sedan (NF) 3.3 Tucson SUV (JM) 2.0 All-wheel Drive Kia Ophiles Saloon (GH) 2003/09-
    Azun (TG) 2.2 CRDi ix20 (JC) 1.2 Sonata sedan (NF) 2.0 CRDi Sonata sedan (NF) 3.3 Kia Margentys, 2001/05- The Ophiles sedan (GH) 3.8 V6
    Azun (TG) 2.2 CRDi ix20 (JC) 1.4 Sonata Saloon (NF) 2.0 VVTi GLS Hyundai Sonata sedan 2009/01-2015/12 Margentics sedan (GD) 2.7 V6 Kia Sportage SUV (JE_) 2004/09-
    Azun (TG) 2.7 HYUNDAI Sonata (EF) 1998/03-2005/12 Sonata Saloon (NF) 2.0 VVTi GLS Sonata sedan 2.4 Kia Margentys, 2005/10- Sportage SUV (JE_) 2.0 CRDi 4WD
    Azun (TG) 3.3 Sonata Saloon (EF) 2.0 CRDi Dynamic Sonata sedan (NF) 2.4 Hyundai Tucson SUV (JM) 2004/08- Margentics sedan 2.4 Sportage SUV (JE_) 2.0 i 16V
    Azun (TG) 3.3 Hyundai Sonata (NF) 2004/12-2012/11 Sonata sedan (NF) 2.4 Tucson SUV (JM) 2.0 Margentics sedan 2.7 Sportage SUV (JE_) 2.7 V6 4WD
    Azun (TG) 3.8 Sonata sedan (NF) 2.0 CRDi Sonata sedan (NF) 3.3
    Write your message here and send it to us